Honeywell PX940 - Page 101

PX940 User Guide 87
Media Setting Description Default
Media Type Selects the type of media that is loaded in the printer. Media With Gaps
Print Method Selects the method of printing that the printer is using. Ribbon (TTR) for
thermal transfer
printers, or No
Ribbon (DT) for
direct thermal
printers
Media Margin (X) Sets the width of the margin from the left edge of the
label along the printhead to the edge of the printable
area. Unit of measurement is defined in the Unit of
Measurement parameter.
Variable
Media Width Sets the width of the printable area measured from the
media margin (X) across the printhead. Unit of
measurement is defined in the Unit of Measure
parameter.
Variable
Media margin (X)
Media width (X)