Honeywell PX940

PX940 User Guide 37
Save a Printer Profile from the Main Menu
Use this procedure to save the current settings as a printer profile.
1. From the Ready screen, press the Main Menu button. The Main Menu appears.
2. Select Tools > Profiles. The Profiles menu appears.
3. Select Create. The Create Profile menu appears.
Note: selecting Create acts as the Save function
4. Select the Filename text box and type a name for the profile. The profiles can
have up to sixteen characters.
5. Press on the SIP to save your profile name and go back to the Save Profile
menu.
6. Press and wait until Complete appears on the screen.
7. Press to return to the Main Menu.
Load a Printer Profile from the Main Menu
Use this procedure to load a saved printer profile on the printer.
1. From the Ready screen, press the Main Menu button. The Main Menu appears.
2. Select Tools > Profiles. The Profiles menu appears.
3. Select Load. The Load Profile menu appears.
4. Select the profile you want to load on the printer and press .
5. When Complete appears on the screen, press to return to the Main
Menu.
Load a Printer Profile Using Programming Commands
You can load a saved printer profile to another printer by sending programming
commands directly from your PC to the printer through a terminal program (such
as HyperTerminal), a serial connection, or a network connection. All commands are
case-sensitive.
Note: To load printer profiles that modify communication settings that require itadmin
rights, you must log in as an itadmin: RUN “su- p pass itadmin” for FD/DP.