Honeywell PX940 - Barcode Information

PX940 User Guide 53
Barcode Information
Content
Read/
NoRead
ISO 15415/
15416
GS1
General
(out of
scope)
Description
Barcode ID Yes Yes Yes Unique number for individual barcode in each label.
Number start from 1.
Example: <Barcode ID="1">
Symbology Yes Yes Yes Barcode type
Example: <Symbology>CODE39</Symbology>
Size Yes Yes Yes Barcode size
Example: <Size>9.8 mils</Size>
Data Yes Yes Yes Decoded data. For Read / No Read, this field will leave
empty if failed in either one of the passing criteria.
Example: <Data>1234567890</Data>
Encoded
Data
No Yes Yes Encoded data. This field displays the data together with all
encoded symbol characters for 1D barcode.
Example:
<EncodedData><Start>1234567890<Stop></
EncodedData>
Grade No Yes Yes Grading results for this barcode
Example: <Grade>3.3 (B)/5/660</Grade>
Status Yes Yes Yes Verification status for this barcode, Pass or Fail
Example: <Status>Pass</Status>
Scan Line
Data Check
Yes Yes Yes Scan line data consistency check status for 1D barcode.
Status:
a) Pass - All 10 scan line data is same.
b) Fail - At least 1 of the scan line data mismatched with
others.
c) NA - 2D barcode
Example:
<ScanLineDataCheck>Pass</ScanLineDataCheck>
X position Yes Yes Yes Barcode X coordinate start position in pixel.
Example: <XPos>100</XPos>
Y position Yes Yes Yes Barcode Y coordinate start position in pixel.
Example: <YPos>100</YPos>
Width Yes Yes Yes Barcode width in pixels
Example: <Width>720 pixels</Width>
Height Yes Yes Yes Barcode height in pixels
Example: <Height>480 pixels</Height>