Honeywell PX940

PX940 User Guide 45
Void Pattern
Select the void pattern type to mark the failed label.
Note: The grid pattern makes the barcode non-readable whereas the diamond pattern is a
visual void pattern.
Note: Grid pattern may cause media jam on certain special media configurations.
Print Modes and Speed
Print verification works for the following mode:
• Printer command language: Autosense, FP/DP, ZSim, IPL, DPL
Note: Voiding not supported in peel off mode
Barcode Symbologies Supported
The verifier supports the following barcode symbologies:
•Code 39
•HIBC 39
•Code 128
•ISBT-128
•HIBC 128
•EAN-8
•EAN-13
•EAN-128
•UPC-A
•UPC-E
• Interleaved 2 of 5
•ITF-14
• Data Matrix (square and rectangular) ECC 200
• ISBT Data Matrix
Barcode Orientations
• Picket or ladder orientation
Barcode Size Supported
• Minimum 1D barcode size: 10 mils