EasyManuals Logo
Home>Honeywell>Tablet>ScanPal EDA10A

Honeywell ScanPal EDA10A User Manual

Honeywell ScanPal EDA10A
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
12 EDA10A Enterprise Tablet User Guide
Battery Life and Conservation
If you store the batteries outside the tablet for long periods of time, they slowly
discharge. Honeywell recommends storing the battery in a charger to maintain
battery performance.
Battery Recommendations and Safety Precautions
To learn more about Battery Maintenance for Portable Devices, go to
honeywell.com/PSS-BatteryMaintenance.
For maximum battery life, charge the battery at 0 °C (32 °F) to 60 °C (140 °F)
and store at 25 °C (77 °F) with a 30% charge.
Do not store the battery pack at temperatures above 45 °C (113 °F). Storage
above 45 °C (113 °F) may damage the battery pack.
Charge the battery before use. Battery ships with a partial charge only.
See Charge the Battery, beginning on page 6 for approved charging methods.
Use of this battery in other devices could result in damage to the device or
battery.
Avoid dropping the battery or tablet. If you suspect that the battery or tablet is
damaged, send it to a Honeywell service center for inspection.
Replace this battery only with another EDA10A battery as identified below.
These batteries have been tested in accordance with applicable safety
When you want to: Do this to save battery power
Use the tablet, and
the battery status
LED turns red
Connect the tablet to an external power source to charge.
Or swap the battery for a fully charged one (see Hot Swap on page 7).
Stop using the tablet
for 5 minutes or more
Press the Power button to suspend the tablet.
Store the tablet for
more than a day
If you are storing the tablet for a few days (such as over the weekend),
install a charged battery or connect the tablet to a power source.
If you are storing the tablet for a longer period of time, fully charge the
battery. When the battery is done charging, store both the battery and
the tablet in a cool location.
If you store the battery for several months, recharge the battery
periodically to keep it at peak performance.
Store the battery
outside the tablet
Store the battery in a charger.
Caution: Improper battery replacement or incompatible device usage
may result in risk of burns, fire, explosion, or other hazard.
Dispose of lithium-ion batteries according to local regulations.
Risk of fire and burns if improperly handled. Do not open, crush,
heat above 60°C (140°F), or incinerate.
DRAFT - 3/24/23

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell ScanPal EDA10A and is the answer not in the manual?

Honeywell ScanPal EDA10A Specifications

General IconGeneral
BrandHoneywell
ModelScanPal EDA10A
CategoryTablet
LanguageEnglish

Related product manuals