82 EDA10A Enterprise Tablet User Guide
Erase All Data (Factory Reset)
1. Swipe up from the bottom of the Home screen to access all apps.
2. Select Settings > System > Reset options.
3. Tap Erase all data (factory reset).
4. Tap Erase all data.
5. If prompted, type your screen lock security pattern, PIN, or password and tap
next ( ).
6. Tap Erase Everything. A message appears informing you a Full factory reset is
being performed.
Repairs
Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center (see Customer Support on
page vii).
Maintenance
Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following section describes
periodic checks to ensure dependable operation.
Clean the Tablet
The tablet housing, scanner window, camera window and touch screen may be
cleaned with a soft cloth dampened with water. The touch screen can also be
cleaned with isopropyl alcohol 70%.
Note: Reading performance may degrade if the scanner window is not clean. If the window
is visibly dirty, or if the scanner is not operating well, clean the window.
Caution: Do not submerge the tablet in water. Do not use abrasive wipes
or cloths on the windows or touch screen. Abrasive wipes may
scratch the windows and touch screen. Never use solvents (e.g.,
acetone) on the housing or windows. Solvents may damage the
tablet finish, the windows or touch screen.
Caution: Ensure all components are dry prior to mating the tablet with
charging accessories or other peripheral devices. Mating wet
components may cause damage not covered by the warranty.
To Next Page
Loading...
Need help?
General
