EDA10A Enterprise Tablet User Guide 23
About Status Bar Icons
Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Remap a Button or Key
You can change the default function of the Left Scan, Right Scan, Rear Scan,
Volume Up, and Volume Down buttons as well as the Back, Home, and Recent
virtual buttons.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Keyremap.
3. Tap the plus sign (+).
4. Press the button you want to remap or select one of the virtual keys.
5. Tap OK.
6. Select one of the following options:
•Tap Keys to view available functions. Select the function you want assigned
to the button.
•Tap Apps to view available applications. Select the application you want
assigned to the button.
•Tap Actions to enter an Intent or Broadcast. Tap OK to assign the action to
the button. For example, to send a Broadcast,
Icon Description Icon Description
Pending alarm and Alarm is set Airplane mode is turned On.
New text message or multimedia
message
Bluetooth is turned On.
Error with text or multimedia message
delivery
SD card is full
New email Wi-Fi network connected with full
signal strength
Computer is connected to a PC with a
USB cable
Wi-Fi network connected but no signal
strength
Synchronizing data Error with sync or sign-in
Computer is connected with Ethernet
To Next Page
Loading...
Need help?
General
