Honeywell Solaris 7980g

194 Solaris 7980g User Guide
Top of Centering Window (*40%) DECTOP### 51
Bottom of Centering Window (*60%) DECBOT### 51
Preferred Symbology On PRFENA1 51
*Off PRFENA0 52
High Priority Symbology PRFCOD## 52
Low Priority Symbology PRFBLK## 52
Preferred Symbology Timeout
(*500) Range 100-3000
PRFPTO#### 52
Preferred Symbology Default PRFDFT 53
Character Activation Mode *Off HSTCEN0 53
On HSTCEN1 53
Activation Character HSTACH## 53
Do Not End Character Activation After
Good Read
HSTCGD0 53
End Character Activation After Good Read HSTCGD1 53
Character Activation Led Timeout (Range
1 - 65535) *5000 ms
HSTCDT##### 54
Character Deactivation Mode *Off HSTDEN0 54
On HSTDEN1 54
Deactivation Character HSTDCH## 54
Output Sequence Editor Enter Sequence SEQBLK 59
*Discard Partial Sequence SEQTTS0 61
Default Sequence SEQDFT 61
Require Output Sequence Required SEQ_EN2 61
On/Not Required SEQ_EN1 61
*Off SEQ_EN0 61
No Read On SHWNRD1 62
*Off SHWNRD0 62
Video Reverse Video Reverse Only VIDREV1 62
Video Reverse and Standard Bar Codes VIDREV2 62
*Video Reverse Off VIDREV0 63
Working Orientation *Upright ROTATN0 63
Vertical, Bottom to Top (Rotate CCW 90°) ROTATN1 63
Upside Down ROTATN2 63
Vertical, Top to Bottom (Rotate CW 90°) ROTATN3 63
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 67
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page