Honeywell Solaris 7980g

Solaris 7980g User Guide 195
Prefix Add Prefix PREBK2## 67
Clear One Prefix PRECL2 67
Clear All Prefixes PRECA2 67
Suffix Add Suffix SUFBK2## 67
Clear One Suffix SUFCL2 67
Clear All Suffixes SUFCA2 67
Function Code Transmit *Enable RMVFNC0 68
Disable RMVFNC1 68
Intercharacter Delay Range 0 - 1000 (5ms increments) DLYCHR## 69
User Specified
Intercharacter Delay
Delay Length
0 - 1000 (5ms increments)
DLYCRX## 69
Character to Trigger Delay DLY_XX## 69
Interfunction Delay Range 0 - 1000 (5ms increments) DLYFNC## 70
Intermessage Delay Range 0 - 1000 (5ms increments) DLYMSG## 70
Data Format Selections
Data Format Editor *Default Data Format (None) DFMDF3 72
Enter Data Format DFMBK3## 73
Clear One Data Format DFMCL3 73
Clear All Data Formats DFMCA3 73
Data Formatter Data Formatter Off DFM_EN0 86
*Data Formatter On,
Not Required,
Keep Prefix/Suffix
DFM_EN1 87
Data Format Required,
Keep Prefix/Suffix
DFM_EN2 87
Data Formatter On,
Not Required,
Drop Prefix/Suffix
DFM_EN3 87
Data Format Required,
Drop Prefix/Suffix
DFM_EN4 87
Data Format Non-Match Error
Tone
*Data Format Non-Match Error Tone On DFMDEC0 88
Data Format Non-Match Error Tone Off DFMDEC1 88
Primary/Alternate Data Formats Primary Data Format ALTFNM0 88
Data Format 1 ALTFNM1 88
Data Format 2 ALTFNM2 88
Data Format 3 ALTFNM3 88
Single Scan Data Format Change Single Scan-Primary
Data Format
VSAF_0 89
Single Scan-Data Format 1 VSAF_1 89
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page