Honeywell Solaris 7980g

196 Solaris 7980g User Guide
Single Scan-Data Format 2 VSAF_2 89
Single Scan-Data Format 3 VSAF_3 89
Symbologies
All Symbologies All Symbologies Off ALLENA0 92
Codabar Default All Codabar
Settings
CBRDFT 92
*On CBRENA1 92
Off CBRENA0 93
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 93
Transmit CBRSSX1 93
Codabar Check Char. *No Check Char. CBRCK20 93
Validate, But Don’t Transmit CBRCK21 93
Validate, and Transmit CBRCK22 94
Codabar Concatenation *Off CBRCCT0 94
On CBRCCT1 94
Require CBRCCT2 94
Codabar Redundancy Range (0 - 10) *0 CBRVOT## 94
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 95
Maximum (2 - 60) *60 CBRMAX## 95
Code 39 Default All Code 39
Settings
C39DFT 95
Off C39ENA0 95
*On C39ENA1 95
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 96
Transmit C39SSX1 95
Code 39 Check Char. *No Check Char. C39CK20 96
Validate, But Don’t
Transmit
C39CK21 96
Validate,
and Transmit
C39CK22 96
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 96
Maximum (0 - 48) *48 C39MAX## 96
Code 39 Append *Off C39APP0 97
On C39APP1 97
Code 39 Redundancy Range (0 - 10) *0 C39VOT## 97
Code 32 Pharmaceutical (PARAF) *Off C39B320 97
On C39B321 97
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page