Solaris 7980g User Guide 197
Code 39 Full ASCII *Off C39ASC0 98
On C39ASC1 98
Code 39 Code Page C39DCP 99
Interleaved 2 of 5 Default All Interleaved
2 of 5 Settings
I25DFT 99
Off I25ENA0 99
*On I25ENA1 99
Interleaved 2 of 5 Check Digit *No Check Char. I25CK20 99
Validate, But Don’t
Transmit
I25CK21 100
Validate, and Transmit I25CK22 100
Interleaved 2 of 5 Redundancy Range (0 - 10) *0 I25VOT## 100
Interleaved 2 of 5 Message Length Minimum (2 - 80) *4 I25MIN## 100
Maximum (2 - 80) *80 I25MAX## 100
NEC 2 of 5 Default All NEC
2 of 5 Settings
N25DFT 100
Off N25ENA0 101
*On N25ENA1 101
NEC 2 of 5 Check Digit *No Check Char. N25CK20 101
Validate, But Don’t
Transmit
N25CK21 101
Validate, and Transmit N25CK22 101
NEC 2 of 5 Message Length Minimum (2 - 80) *4 N25MIN## 101
Maximum (2 - 80) *80 N25MAX## 102
Code 93 Default All Code 93
Settings
C93DFT 102
Off C93ENA0 102
*On C93ENA1 103
Code 93 Message Length Minimum (0 - 80) *0 C93MIN## 102
Maximum (0 - 80) *80 C93MAX## 102
Code 93 Append On C93APP1 103
*Off C93APP0 103
Code 93 Code Page Code 93 Code Page C93DCP 103
Straight 2 of 5 Industrial Default All Straight 2 of 5 Industrial
Settings
R25DFT 103
*Off R25ENA0 103
On R25ENA1 103
Straight 2 of 5 Industrial Message
Length
Minimum (1 - 48) *4 R25MIN## 104
Maximum (1 - 48) *48 R25MAX## 104
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page