Honeywell VFD CORE

CHAPTER 11: SUMMARIES OF PARAMETER SETTINGS
63-4528—04 100
00-21 User Defined Value Read Only
Read
Only
00-22 Local / Remote Selection
0: Standard HOA
1: LOC/REM not maintain
2: REM maintain
3: LOC maintain
4: LOC/REM maintain
0
a
00-23
Source of the Master
Frequency Command
(HAND)
0: Digital keypad
1: RS-485 serial communication
2: External analog input (Pr.03-00)
3: External UP/DOWN terminal
6: CANopen communication card
8: Communication card (no CANopen card)
0
a
00-24
Source of the Operation
Command (HAND)
0: Digital keypad
1: External terminals. Keypad STOP disabled.
2: RS-485 serial communication. Keypad STOP disabled.
3: CANopen communication card
5: Communication card (not include CANopen card)
0
00-25
Digital Keypad STOP
Function
0: STOP key disable
1: STOP key enable
0
00-26 Display Filter Time (Current) 0.001~65.535 0.100
00-27 Display Filter Time (Keypad) 0.001~65.535 0.100
00-28 Software Version (Date Code) 0~65535
Read
Only
Parameter Function Setting
Factory
Setting