Honeywell VFD CORE

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
63-4528—04 186
• When malfunction occurs, user can check the current DC voltage. If it happens again, it will overwrite the previous record.
• When malfunction occurs, user can check the current output current. If it happens again, it will overwrite the previous record.
• When malfunction occurs, user can check the current IGBT temperature. If it happens again, it will overwrite the previous
record.
• When malfunction occurs, user can check the current capacitance temperature. If it happens again, it will overwrite the
previous record.
• When malfunction occurs, user can check the current motor speed in rpm. If it happens again, it will overwrite the previous
record
• When malfunction occurs, user can check the status of multi-function input/output terminals. If it happens again, it will
overwrite the previous record
• When malfunction occurs, please check the drive status (communication address 2119H). If malfunction happens again, the
previous record will be overwritten by this parameter.
06 - 32 Output Current at Malfunction
Factory Setting: Read Only
Settings 0.00~655.35Amp
06 - 33 IGBT Temperature at Malfunction
Factory Setting: Read Only
Settings 0.0~6553.5°C
06 - 34 Capacitance Temperature at Malfunction
Factory Setting: Read Only
Settings 0.0~6553.5°C
06 - 35 Motor Speed in rpm at Malfunction
Factory Setting: Read Only
Settings 0.0~6553.5 RPM
06 - 36 Status of Multi-function Input Terminal at Malfunction
Factory Setting: Read Only
Settings 0~65535
06 – 37 Status of Multi-function Output Terminal at Malfunction
Factory Setting: Read Only
Settings 0~65535
06 - 38 Drive Status at Malfunction
Factory Setting: Read Only
Settings 0~65535