Honeywell VFD CORE

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
63-4528—04 222
• There is a group of block transfer parameter available in the VFD (Pr.09-07 to Pr.09-16). User can use them (Pr.09-07 to Pr.09-
16) to save those parameters that you want to read.
a
09 - 13 Block Transfer 7
a
09 - 14 Block Transfer 8
a
09 - 15 Block Transfer 9
a
09 - 16 Block Transfer 10
a
09 - 17 Block Transfer 11
a
09 - 18 Block Transfer 12
a
09 - 19 Block Transfer 13
a
09 - 20 Block Transfer 14
a
09 - 21 Block Transfer 15
a
09 - 22 Block Transfer 16
Factory Setting: 0
Settings 0~65535
09 - 23 Communication Decoding Method
Factory Setting: 1
Settings 0: by 20XX
1: by 60XX
09 - 24 COM 1 Protocol
Settings 0: RS485 Factory Setting: 0
1: Bacnet
09 - 25 PLC address
Factory Setting: 2
Settings 1~254
09 - 26 CANopen Slave Address
Factory Setting: 0
Settings 0: Disable
1~127
09 - 27 CAN Open Speed
Factory Setting: 0
Settings 0: 1M
1: 500k
2: 250k
3: 125k
4: 100k (Honeywell only)
5: 50k