Honeywell VFD CORE

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
227 63-4528—04
• Setting 1: IP address will be auto set by host controller
09 - 51 IP Address 1 of the Communication Card
09 - 52 IP Address 2 of the Communication Card
09 - 53 IP Address 3 of the Communication Card
09 - 54 IP Address 4 of the Communication Card
Factory Setting: 0
Settings 0~255
09 - 55 Address Mask 1 of the Communication Card
09 - 56 Address Mask 2 of the Communication Card
09 - 57 Address Mask 3 of the Communication Card
09 - 58 Address Mask 4 of the Communication Card
Factory Setting: 0
Settings 0~255
09 - 59 Getway Address 1 of the Communication Card
09 - 60 Getway Address 2 of the Communication Card
09 - 61 Getway Address 3 of the Communication Card
09 - 62 Getway Address 4 of the Communication Card
Factory Setting: 0
Settings 0~255
09 - 63 Password for Communication Card (Low word)
09 - 64 Password for Communication Card (High word)
Factory Setting: 0
Settings 0~99
09 - 65 Reset Communication Card
Factory Setting: 0
Settings 0: Disable
1: Reset to the factory setting