Chapter 2
Using the Talkman A700 Device
Figure 1: Getting to Know the Vocollect Talkman
®
A700 Device
10. End cap: Varies by model6. Bluetooth indicator1. Device state indicator
11. TouchConfig/TouchConnect
area
7. Near Field Communication
indicator
2. Play/Pause button
3. Battery indicator
12. Battery release button8. Network connectivity indicator
4. Plus button
13. Battery9. Operator button
5. Minus button
The Talkman
®
A700 solution is a set of voice-centric appliances, each of which is a unique tool designed for
a specific set of DC workflows, so each customer can pick the best tools for its needs. Each member of the
A700 solution has a USB port that is used for maintenance, loading software, and connecting supervisor
audio. The different appliances share the same standard platform. The A700 devices can integrate into various
IT environments, provide an advanced battery management solution, and help customers keep better track
of their devices.
The Talkman A710 is designed for use with Bluetooth wireless headsets and peripherals.
The Talkman A720 has two Talkman connectors for attaching wired headsets (yellow port) and wired
peripherals (red/blue port).
The Talkman A730 is the device that supports both 1D and 2D barcodes using an imager for short range
scanning, up to 75 centimeters/29.53 inches depending on barcode size. The design supports common use
cases such as tote induction or capturing the weight of specific products. It supports all of the popular
symbologies. See Talkman A730 Symbologies for a full list.
All three devices have maintenance ports that can be connected to a computer with a standard USB cable.
Vocollect also offers a cable with an audio jack that can be used for connecting a listening kit.
Confidential: For informational use by Honeywell resellers and customers only
To Next Page
Loading...
