Honeywell Vocollect Talkman A700 - Connecting the Pidion BM-170 Display to a Talkman A500;A700

Connecting the Pidion BM-170 Display to a Talkman A500/A700
1.
Turn on the Talkman A500 or A700 device.
2.
Turn on the display.
The display will initialize.
Figure 11: The Initial Screen
3.
Press the Connect to a Voice Device button to begin connecting the display to your Talkman.
A list of nearby devices' serial numbers that can accept a connection are displayed.
Figure 12: List of Devices
4.
Select the serial number of the Talkman to which you want to connect and confirm your selection.
Figure 13: Confirming the Connection
You will be taken back to the main screen, and the display will be connected to the Talkman.
Confidential: For informational use by Honeywell resellers and customers only
36 | Vocollect Talkman A700 Product Guide