SolutionTextNumber
—Flash library failed during erase.0x2105
—Flash failed because of invalid flash
write pointer argument.
0x2106
—Flash library failed during write.0x2107
—Flash failed because of invalid flash
read pointer argument.
0x2108
—Flash library failed during read.0x2109
—Flash library failed while deleting a
file.
0x210a
—Flash library failed while finding a
file.
0x210b
—Flash failed to open the specified file
in RAM.
0x210c
—Flash failed to read the specified file
from RAM.
0x210d
—Flash failed to write the specified file
to RAM.
0x210e
—Flash library failed while opening a
file.
0x210f
—Flash library failed while closing a
file.
0x2110
—Flash had invalid flash file image
generator linked list.
0x2111
—Flash is full. Please wait while
Talkman turns off.
0x2112
—Flash library failed. Out of space.0x2115
—Flash library failed during reclaim.0x2116
Spoken Error Messages
SolutionError Message
Change the battery."Battery is very low. Powering off. Must
replace battery after power off complete."
Change the battery."Battery is getting low."
Change the battery."Battery is getting low. Change battery
now."
Wait until all templates are loaded, then load the operator."Cannot load operator while sending
templates."
"Cannot load task. Processing data."
1.
Turn the device off and then turn it back on again.
2.
Reload the task.
Confidential: For informational use by Honeywell resellers and customers only
48 | Vocollect Talkman A700 Product Guide
To Next Page
Loading...
