Honeywell Vocollect Talkman A700 - Contacting Technical Support

SolutionError Message
2.
Reboot the device.
3.
Reload VoiceClient.
"Unable to retrieve operator files."
1.
Turn the device off and then turn it back on again.
2.
Reboot the device.
3.
Reload VoiceClient.
"Unable to send output data."
1.
Turn the device off and then turn it back on again.
2.
Reboot the device.
3.
Reload VoiceClient.
"Unable to train words. Not enough free
flash memory."
1.
Wait for the device to go to sleep.
2.
Turn the device off and then turn it back on again.
3.
Reboot the device.
4.
Reload VoiceClient.
"Warning, low flash memory!"
1.
Go to an area of known good coverage.
2.
Turn the device off and then turn it back on again.
3.
Reboot the device.
4.
Reload VoiceClient.
5.
Place the device in a charger as soon as possible.
"Warning, low flash memory! You must
upload your collected data now!"
1.
Go to an area of known good coverage.
2.
Turn the device off and then turn it back on again.
3.
Reboot the device.
4.
Reload VoiceClient.
5.
Place the device in a charger as soon as possible.
Contacting Technical Support
This section describes what you will need before contacting technical support with an issue and how to gather
the needed files.
General Information Needed for Most Support Requests
Vocollect Talkman modelDevices Types
Non-Talkman device manufacturer/model
Vocollect headset model
Other headset
Bar code reader type
VoiceClient version displayed in VoiceConsoleVocollect Voice Software
Confidential: For informational use by Honeywell resellers and customers only
52 | Vocollect Talkman A700 Product Guide