Non-replacableBelt fastener
Vehicle Mounts for Talkman A700
The Screw-on Mount is a mounting option that is bolted to a stationary surface on a vehicle.
The Clamp Mount is a mounting option that is clamped to a stationary surface on a vehicle. This can also be
bolted to a stationary surface, if desired.
The Claw Mount is also clamped to a stationary surface, but can be clamped to oddly-shaped or horizontal
or vertical surfaces.
Figure 19: Claw Mount
Figure 18: Clamp MountFigure 17: Screw On Mount
Positioning the Talkman A700 Vehicle Dock
• Determine the best position for the device and all the associated components. If a similar device was
previously installed, check to see if the position it used is suitable for the device.
• Check that the position of the device does not obstruct vehicle controls.
• Check that the device does not obstruct the driver's view.
• Check the position of the device for user comfort over long periods.
Installing the Mounting Brackets for a Talkman A700 Vehicle Dock
The following parts are supplied by Vocollect for attaching the screw-on mount:
DescriptionQuantity
Vehicle Mount, Holder/Base Screw On Attachment2
Vehicle Mount, Arm1
Vehicle Mount, Holder1
The following parts are supplied by Vocollect for attaching the clamp-on mount:
DescriptionQuantity
Vehicle Mount, Clamp1
Vehicle Mount, Arm1
Confidential: For informational use by Honeywell resellers and customers only
Accessories | 39
To Next Page
Loading...
