Honeywell Vocollect Talkman A700 - Numbered Error Messages

Numbered Error Messages
SolutionTextNumber
Event detect initialization failed.0x020a
1.
Turn the device off and then turn it back on again.
Event control failed to create shared
data module.
0x0203
2.
Reboot the device.
3.
Reload VoiceClient.
Change the battery.Battery is getting low.0x0206
Battery is getting low. Change
battery now.
0x0207
Battery is very low. Powering off.
Must replace battery after power off
complete.
0x0208
—Noise sampling procedure failed.0x0602
—Noise sampling procedure timed out.0x0603
—Invalid operator file name.0x0605
Train returned bad status to
UpdTrain.
0x060c
1.
Turn the device off and then turn it back on again.
2.
Reboot the device.
3.
Reload VoiceClient.
—Unable to train words. Not enough
free flash memory.
0x060e
Speak failed to initialize properly.0x0802
1.
Check the crashdump file. For more information,
see the VoiceConsole online help.Speech-out failed. Audio system
failure.
0x0804
2.
Turn the device off and then turn it back on again.
3.
Reboot the device.
Dialog power-off failed.0x1201
4.
Reload VoiceClient.
—Task not loaded. No task name
available.
0x1202
—OperLoad failed -- TmplSend busy.0x1203
—Operator load failed.0x1204
—Corrupted operator data.0x1205
—Noise sample failed.0x1206
—There are no operators in this team.0x1207
—Unable to retrieve operator files.0x1208
—Internal error loading operator.0x1209
—Task load failed.0x120a
—Self test mode set, but no script file
found.
0x120b
Confidential: For informational use by Honeywell resellers and customers only
44 | Vocollect Talkman A700 Product Guide