IP67Enclosure Rating
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total
shipment weight.
A700 Product Battery Specifications
The A700 series can use a standard or high-capacity battery.
2.8 ounces (79.38g)Standard Battery Weight
4.6 ounces (130.41g)High-Capacity Battery Weight
Electrical Specifications
• Cells: The high capacity battery pack uses two lithium ion cells.
• Nominal voltage = 3.7V
• Capacity = 4400mAhr or greater
• Protection circuit characteristics: The pack contains a protection circuit that prevents over and under
voltage conditions on the cells and protects the pack from damage as a result of a short circuit between
the positive and negative terminals of the battery.
• The battery pack contains custom electronics that provide performance, temperature, and pack identification
to the device. This information is made available to voice management software.
• Battery Charging: The battery pack must be charged only in a Vocollect designated charger.
Mechanical and Environmental Specifications
• Drop-test specifications
• The high capacity battery meets the MIL STD 810F specification for shock and transient drop criteria.
• Environmental specifications: The battery pack halves are sonically welded together to protect the internals
from water and dust. The battery functions properly in the following conditions:
Operation Temperature: -30°C to 50°C (-22°F to 122°F)
Storage Temperature: -30°C to 60°C (-22°F to 140°F)
Humidity: 95% condensing
Rain/dust: IP67
Battery Notifications
Battery warnings for a Talkman battery occur at the following levels:
• First warning = 30 minutes remaining until empty
• Critical warning = 0 minutes remaining until empty
Confidential: For informational use by Honeywell resellers and customers only
Specifications | 59
To Next Page
Loading...
