If the LEDs indicate that there is a problem, refer to information on troubleshooting to solve the problem. See
also Troubleshooting Problems Indicated by LED.
A700 Device LED Indicators
The Talkman A700 products have several LED indicators to inform you of different states. The indicators and
their blinking patterns are described in the following sections:
Device State Indicator
The device state indicator is a ring that is divided into a larger and smaller segment:
Figure 5: Ring Segments on Device State Indicator
Device StateBlink PatternColor
OffOffOff
SleepSmall segment pulseGreen
OnSmall segment onGreen
Charging completeSolid ringGreen
Touch Config or TouchConnect
successful
Fast blinkGreen
Loading or changing operatorRotating ringYellow
Loading or changing taskRotating ringYellow
Loading or changing voiceRotating ringYellow
Starting upRotating ringYellow
ChargingSolid ringYellow
Platform is loaded, but no task
loaded
Small segment pulseYellow
TouchConfig sender mode enteredSmall segment onYellow
TouchConfig receiver mode enteredLarge segment onYellow
Firmware loadRotating ringRed
Early bootRing onRed
Shutting downRotating ringRed
Confidential: For informational use by Honeywell resellers and customers only
Using the Talkman A700 Device | 21
To Next Page
Loading...
