Honeywell Vocollect Talkman A700 - Loading an Operators Templates

NFC StateBlink Pattern
The device is scanning for a tag.Fast blink
TouchConfig sender or receiver mode enteredBlink
The device successfully read a tag.On (for one second then off)
Readable - act as a tagSlow pulse
Bluetooth Indicator
Bluetooth StateBlink Pattern
Bluetooth radio is disabled.Off
Device is searching for other Bluetooth devices.On
Device is attempting to connect to another Bluetooth
device.
Fast blink
Bluetooth is connected to a peripheral.Pulse
Device Bluetooth is discoverable by other devices.Discoverable Blink Pattern
Bluetooth is on and enabled, but is not connected,
not in discovery or paging mode, and not
discoverable.
Slow Pulse
Network Indicator
When This OccursWhat is HappeningNetwork StateNetwork Indicator
No network is
defined for the
device.
The radio is
powered on but the
device is not
attempting to
Radio enabled but unconfiguredOn
connect to the
network.
On first connection,
on re-association
The radio is
powered on and is
Radio enabled and connecting to
network
Fast Blink
and after everyscanning,
roaming out of
network.
associating, and
authenticating.
The device may be
requesting and
Full network
connection.
Connected to networkPulse
receiving an IP
address.
Loading an Operator's Templates
You need a device with a charged battery, headset, and any other equipment (belt, bar code reader) you are
going to use. You must be within radio range. Make sure the device is on or sleeping. The LED indicator
Confidential: For informational use by Honeywell resellers and customers only
Using the Talkman A700 Device | 23