Figure 14: Connected to a Voice Device
Screens relevant to the application loaded onto the voice device will appear once the voice application is
running.
Belts
To comply with government safety standards, the device must be used with the Vocollect belt and standard
or scanning device holster.
A700 Belt Specifications
DimensionsBelt Size
18" - 26" (46cm-66cm)XS
24" - 32" (61cm-81cm)S
28" - 36" (71cm-91cm)M
34" - 42" (61cm-107cm)L
40" - 48" (102cm-122cm)XL
46" - 54" (117cm-137cm)XXL
52" - 60" (132cm-152cm)XXXL
SpecificationBelt Part
NylonBelt material
YKK Hook and LoopVelcro
®
ITW Nexus 127-3200Belt fastener
Using the A730 Scanning Device Holster
A700 devices have two slots that run the length of the body. These can be used to attach the device to a belt.
1.
Put the belt on with the clip either on your right or left side.
2.
Position the device so that the slots on the top and bottom align with the runners on the clip.
3.
Slide the device into the clip until you hear a click.
Confidential: For informational use by Honeywell resellers and customers only
Accessories | 37
To Next Page
Loading...
