Honeywell Vocollect Talkman A700 - Page 49

SolutionError Message
3.
Reboot the device.
4.
Reload VoiceClient.
"Corrupt task file. Task load failed."
1.
Turn the device off and then turn it back on again.
2.
Reload the task.
3.
Reboot the device.
4.
Reload VoiceClient.
"Corrupt device emulation config file. Task
load failed."
Reload the operator."Corrupted operator data."
"Failed to load lookup table. Task load
failed."
1.
Go to an area of known good coverage.
2.
Turn the device off and then turn it back on again.
3.
Reload the task.
4.
Reboot the device.
5.
Reload VoiceClient.
"Failed to load task audio file. Task load
failed."
1.
Go to an area of known good coverage.
2.
Turn the device off and then turn it back on again.
3.
Reload the task.
4.
Reboot the device.
5.
Reload VoiceClient.
"Failed to load task phonetic file. Task load
failed."
1.
Go to an area of known good coverage.
2.
Turn the device off and then turn it back on again.
3.
Reload the task.
4.
Reboot the device.
5.
Reload VoiceClient.
"Failed to load task VCF file. Task load
failed."
1.
Go to an area of known good coverage.
2.
Turn the device off and then turn it back on again.
3.
Reload the task.
4.
Reboot the device.
5.
Reload VoiceClient.
"Failed to load device emulation config file.
Task load failed."
1.
Go to an area of known good coverage.
2.
Turn the device off and then turn it back on again.
3.
Reload the task.
4.
Reboot the device.
5.
Reload VoiceClient.
"Failed to write the ODR NTI registration
file. Task load failed."
1.
Reload the task.
2.
Turn the device off and then turn it back on again.
3.
Reboot the device.
Confidential: For informational use by Honeywell resellers and customers only
Troubleshooting Equipment Problems | 49