Honeywell Vocollect Talkman A700 - Page 75

DescriptionDefault ValueRegistry Key
User-defined symbology identifier. Range is 0-4 characters."K0"CodablockAUDSI
User-defined symbology identifier. Range is 0-4 characters."K1"CodablockFUDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\TLC 39] - TLC 39 Symbology Configuration
Enables the TLC 39 symbology (requires Micro PDF417
and Code 39 to be enabled as well).
0x0TLC39Activation
Ignores Micro PDF417 data and only transmits the Code
39 portion.
0x0TLC39LinearOnlyTransmissionMode
Selects how much time is spent looking an ECI number if
the Code 39 portion of the label is 6 digits. Range is 0x0 -
0x64 (0 to 100), where 0x0 is fastest.
0xaTLC39ECISecurity
A single character inserted before the barcode data to
indicate the symbology.
0x2aTLC39CodeMark
User-defined symbology identifier. Range is 0-4 characters."H0"TLC39UDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\GS1 DataBar] - GS1 DataBar Symbology Configuration
Enables the DataBar Omnidirectional/RSS 14 symbology.0x0DatabarOmniDirectionalActivation
Enables the DataBar Limited/RSS Limited symbology.0x0DatabarLimitedActivation
Enables the DataBar Expanded/RSS Expanded symbology0x0DatabarExpandedActivation
A single character inserted before the barcode data to
indicate the symbology.
0x2aDatabarOmniDirectionalCodeMark
A single character inserted before the barcode data to
indicate the symbology.
0x2aDatabarLimitedCodeMark
A single character inserted before the barcode data to
indicate the symbology.
0x2aDatabarExpandedCodeMark
User-defined symbology identifier. Range is 0-4 characters."C3"DatabarOmniDirectionalUDSI
User-defined symbology identifier. Range is 0-4 characters."C4"DatabarLimitedUDSI
User-defined symbology identifier. Range is 0-4 characters."C5"DatabarExpandedUDSI
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Maxicode] - Maxicode Symbology Configuration
Enables the Maxicode symbology.0x0MaxicodeActivation
Enables the obsolete Mode 0 variant of Maxicode.0x0Mode0
Header for Mode 0 labels, where 0 = regular (AIM) and 1
= extended (same as mode 2/3).
0x0MaxicodeMode0Header
A single character inserted before the barcode data to
indicate the symbology.
0x2aMaxicodeCodeMark
Confidential: For informational use by Honeywell resellers and customers only
Talkman A730 Symbologies | 75