Honeywell Vocollect Talkman A700 - Page 82

DescriptionDefault ValueRegistry Key
Amount of tolerance for what is considered the "center".
Range is 0x0 - 0x64 (0 to 100), where "0x0" is the least
tolerant (must be aimed exactly).
0x0CenterDecodingTolerance
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Imager] - Imager Configuration
Decoding mode, where 0 = linear imager emulation, and 1
= 2D imager.
0x1DecodeMode
Aimer mode, where 0 = on, 1 = decode optimized (flashing
at frame rate), and 2 = off.
0x1AimerFlashing
For 1D barcodes, sets the initial search area. 0 = center, 1
= upper half, 2 = lower half, 3 = full, 4 = "smart raster" (better
for non-horizontal).
0x0Initial1DSearchArea
Enhances the ability to read a DPM (Direct Product Marking)
barcode where the barcode is marked directly on the
product.
0x0DPMMode
Enhances the ability to read damaged or badly printed 1D
barcodes.
0x0Damaged1DCodes
The decoding algorithms spend more time trying to find a
barcode.
0x0ExtensiveBarcodeSearch
Confidential: For informational use by Honeywell resellers and customers only
82 | Vocollect Talkman A700 Product Guide