Honeywell Xenon XP 1950g - Page 128

110 Xenon XP User Guide
But you would add your <> separators for each sequence:
SEQISE99 separator for each sequence, 99 = all symbologies
3C left bracket (<)
3E right bracket (>)
And add the carriage return and line feed as a suffix:
SEQISU99 separator for suffixes, 99 = all symbologies
0D carriage return
0A line feed
And you would add >PARTIAL< as the prefix to note the partial sequence:
SEQTTS1 transmit partial sequence
SEQIPR99 add partial sequence prefix, 99 = all symbologies
3E right bracket (>)
50 P
41 A
52 R
54 T
49 I
41 A
4C L
3C left bracket (<)
The whole command line would look like this:
SEQBLK62999943FF6A999954FF7299994DFF;SEQISE993C3E;SEQISU990D0
A;SEQTTS1;SEQIPR993E5041525449414C3C.
The data is output as:
>PARTIAL<TSTMSGCODE128<>MSGPDF417 [CR] [LF]
SEQDFT;SEQ_EN1;SEQBLK62999943FF6A999954FF7299994DFF;SEQISE993C3E;SEQISU990D0A;
SEQTTS1;SEQIPR993E5041525449414C3C.