Xenon XP User Guide 7
Base vertically, see Mount a CCB-H-010BT/CCB-H-010BT-BF Charge Base on
page 10.
4. Plug the serial connector into the serial port on your computer. Tighten the two
screws to secure the connector to the port.
5. Once the scanner or cordless base has been fully connected, power up the
computer.
This interface programs 115,200 baud, 8 data bits, no parity, and 1 stop bit.
CCB01-010BT/CCB01-010BT-BF Base RS232 Serial Port Connection:
CCB-H-010BT/CCB-H-010BT-BF Base RS232 Serial Port Connection:
To Next Page
Loading...
