Honeywell Xenon XP 1950g - Page 278

260 Xenon XP User Guide
Primary/Alternate Data Formats Primary Data Format ALTFNM0 149
Data Format 1 ALTFNM1 149
Data Format 2 ALTFNM2 149
Data Format 3 ALTFNM3 149
Single Scan Data Format Change Single Scan-Primary
Data Format
VSAF_0 149
Single Scan-Data Format 1 VSAF_1 150
Single Scan-Data Format 2 VSAF_2 150
Single Scan-Data Format 3 VSAF_3 150
Symbologies
All Symbologies All Symbologies Off ALLENA0 152
Codabar Default All Codabar
Settings
CBRDFT 152
Off CBRENA0 152
*On CBRENA1 152
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 153
Transmit CBRSSX1 153
Codabar Check Char. *No Check Char. CBRCK20 153
Validate, But Don’t Transmit CBRCK21 153
Validate, and Transmit CBRCK22 153
Codabar Concatenation *Off CBRCCT0 154
On CBRCCT1 154
Require CBRCCT2 154
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 154
Maximum (2 - 60) *60 CBRMAX## 154
Code 39 Default All Code 39
Settings
C39DFT 155
Off C39ENA0 155
*On C39ENA1 155
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 155
Transmit C39SSX1 155
Code 39 Check Char. *No Check Char. C39CK20 155
Validate, But Don’t
Transmit
C39CK21 155
Validate,
and Transmit
C39CK22 155
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 156
Maximum (0 - 48) *48 C39MAX## 156
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page