19
Turning o solid fertiliser
(twin hopper version)
Machine data
Back to rst page
Result display
Turning o seed
Third page with seed ow monitoring
Depending on the design of the drill, e.g. with
twin hopper, liquid fertiliser facility or seed ow
monitoring, further symbols will appear on the
third "work page".
Here you find the displays that are not
permanently needed during sowing.
The keys can be used to switch over to further
functions.
Display readings
1. The number of the tram line rhythm from the
table - not the number of bouts.
2. Nominal value of seed quantity in metering
unit I. With twin hopper the fertiliser quantity
in metering unit II or the liquid fertiliser
quantity.
3. RPM-meter for two shafts.
4. Hopper 1 - lling level indicator for seed
hopper. Hopper 2 - lling level indicator for
fertiliser hopper. Display 1 = full, 0 = not full
(lling level below sensor height).
5. Monitoring of metering units, e.g. in case of
bridging in seed or fertiliser hopper. Display
1 = full, 0 = metering unit empty.
6. Sensitivity setting for seed ow monitoring
and display of blocked seed hoses.
7. Plus and minus key to set the sensitivity of
seed ow monitoring.
8. Switch-over to the seed flow monitoring
diagnostics.
From this page you can switch to further menus.
4
3
5
1
2
6
7
8
To Next Page
Loading...