Section
I1
Paragraphs
2-15
to
2-17
2-15.
To
preserve the protectionfeature when oper-
ating the instrument from
a
two-contact outlet, use
a
three-prong to two-prong adapter and connect the
pigtail on the adapter to ground.
2-16.
REPACKING FOR SHIPMENT.
Model
204B
2-17.
The following
is
a
general guide for repack-
aging an instrument for shipment.
If
you have any
questions, contact your local
@sales
office
or
repair
facility. Proceed
as
follows:
a.
Place instrument in original container
if
avai-
able.
If
original container
is
not available, it can be
purchased from your nearest Hewlett-Packard Sales
and Service Office (refer to maps in Appendix).
b.
If
original container
is
not used, wrap instru-
ment in heavy paper
or
plastic before placing in
inner container.
c.
Use
a
heavy carton
or
wooden box
to
house the
instrument and inner container and use strong tape or
metal bands to
seal
the shipping container.
d. Mark shipping container with "Delicate Instru-
ment", "Fragile", etc.
as
appropriate.
Note
If
instrument
is
to be shipped to Hewlett-
Packard for service
or
repair, attach
a
tag
to instrument identifying owner,model
number, serial number, and indicating
service
or
repair to be performed. In any
correspondence identify instrument by
model number and serial number,and
serial number prefix.
ADAPTER
FRAME
T
1/2
MODULE
INSTRUMENT
CLAMP
204B-M-10A
Figure
2
-4.
Two Submodule Units
in Rack Adapter
2-2
01369-3
To Next Page
Loading...
