HP 3100 Series

175
# Configure customer-side port Ethernet 1/0/2 as a trunk port, assign the port to CVLANs 4 through
6 and SVLAN 102, and apply uplink policy p2 to the incoming traffic of the port.
[SwitchA] interface ethernet 1/0/2
[SwitchA-Ethernet1/0/2] port link-type trunk
[SwitchA-Ethernet1/0/2] port trunk permit vlan 4 5 6 102
[SwitchA-Ethernet1/0/2] qos apply policy p2 inbound
[SwitchA-Ethernet1/0/2] quit
# Configure network-side port Ethernet 1/0/3 as a trunk port, and assign it to all CVLANs and
SVLANs.
[SwitchA] interface ethernet 1/0/3
[SwitchA-Ethernet1/0/3] port link-type trunk
[SwitchA-Ethernet1/0/3] port trunk permit vlan 1 to 6 101 102