6-10
Interface Access and System Information
System Information
Interface Access and
System Information
3. Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
[Enter], then press [S] (for S
ave) and return to the Main Menu.
CLI: Viewing and Configuring System Information
System Information Commands Used in This Section
Listing the Current System Information. This command lists the current
system information settings.
Syntax: show system-information
This example shows the switch’s default console configuration.
Figure 6-6. Example of CLI System Information Listing
show system-information below
hostname below
snmp-server
[contact] [location]
below
mac-age-time page 6-12
time
timezone page 6-12
daylight-time-rule page 6-12
date
time
page 6-12
To Next Page
Loading...
