1-4
Selecting a Management Interface
Advantages of Using the CLI
Selecting a Management
Interface
Advantages of Using the CLI
Figure 1-2. Example of The Command Prompt
â– Provides access to the complete set of the switch configuration, perfor-
mance, and diagnostic features.
â– Offers out-of-band access (through the RS-232 connection) or Telnet (in-
band) access.
â– Enables quick, detailed system configuration and management access to
system operators and administrators experienced in command prompt
interfaces.
â– Provides help at each level for determining available options and vari-
ables.
CLI Usage
â– For information on how to use the CLI, refer to chapter 3. "Using the
Command Line Interface (CLI)".
â– To perform specific procedures (such as configuring IP addressing or
VLANs), use the Contents listing at the front of the manual to locate the
information you need.
â– To monitor and analyze switch operation, see chapter XXXX, "Monitoring
and Analyzing Switch Operation".
â– For information on individual CLI commands, refer to the Index or to the
online Help provided in the CLI interface.
HP4108>
Operator Level
HP4108#
Manager Level
HP4108(config)#
Global Configuration Level
HP4108(<context>)#
Context Configuration Levels (port, VLAN)
To Next Page
Loading...
Need help?
General