HP 4108GL User Manual

13-47
HP Procurve Stack Management
HP Procurve Stack Management
HP Procurve Stack
Management
■ Stacking uses only the primary VLAN on each switch in a stack.
■ The primary VLAN can be tagged or untagged as needed in the
stacking path from switch to switch.
■ The same VLAN ID (VID) must be assigned to the primary VLAN in
each stacked switch.
Web: Viewing and Configuring Stacking
Figure 13-38. Example of the Web Browser Interface for a Commander
The web browser interface for a Commander appears as shown above. The
interface for Members and Candidates appears the same as for a non-stacking
Switch 4108GL.
To view or configure stacking on the web browser interface:
1. Click on the Configuration tab.
2. Click on [Stacking] to display the stackingconfiguration for an individual
switch, and make any configuration changes you want for that switch.
3. Click on [Apply Changes] to save any configuration changes for the individual
switch.
4. If the switch is a Commander, use the [Stack Closeup] and [Stack Management]
buttons for viewing and using stack features.
To access the web-based Help provided for the switch, click on [?] in the web
browser screen.

HP 4108GL Specifications

General

Brand	HP
Model	4108GL
Category	Switch
Language	English