10-8
Using Authorized IP Managers for Increased Management Security
Using Authorized IP Managers
Using Authorized IP
Managers
Editing or Deleting an Authorized Manager Entry. Go to the IP Manag-
ers List screen (figure 10-1), highlight the desired entry, and press [E] (for Edit)
or [D] (for Delete).
CLI: Viewing and Configuring Authorized IP Managers
Authorized IP Managers Commands Used in This Section
Listing the Switch’s Current Authorized IP Manager(s)
Use the show ip authorized-managers command to list IP stations authorized to
access the switch. For example:
Figure 10-3. Example of the Show IP Authorized-Manager Display
The above example shows an Authorized IP Manager List that allows stations
to access the switch as shown below:
show ip authorized-managers below
ip authorized-managers page 10-9: “To Authorize Manager Access”
page 10-9: “To Edit an Existing Manager Access Entry”
page 10-10: “To Delete an Authorized Manager Entry”
<ip-address>
mask <mask-bits>
<operator | manager>
IP Mask Authorized Station IP Address: Access Mode:
255.255.255.252 10.28.227.100 through 103 Manager
255.255.255.254 10.28.227.104 through 105 Manager
255.255.255.255 10.28.227.125 Manager
255.255.255.0 10.28.227.0 through 255 Operator
To Next Page
Loading...
Need help?
General