14-18
Port-Based Virtual LANs (VLANs) and GVRP
Port-Based Virtual LANs (Static VLANs)
Port-Based Virtual LANs
(VLANs) and GVRP
Displaying the Configuration for a Particular VLAN . This command
uses the VID to identify and display the data for a specific static or dynamic
VLAN.
Syntax: show vlan <vlan-id>
Figure 14-13. Example of “Show VLAN” for a Specific Static VLAN
Figure 14-14. Example of “Show VLAN” for a Specific Dynamic VLAN
Show VLAN lists this
data when GVRP is
enabled and at least
one port on the switch
has dynamically
joined the designated
VLAN.
To Next Page
Loading...
