A-11
File Transfers
Downloading an Operating System (OS)
File Transfers
If you do not specify either a primary or secondary flash location for the
destination, the download automatically goes to primary flash.
For example, to download an OS file from secondary flash in a Switch 4108GL
with an IP address of 10.28.227.103 to the secondary flash in the destination
switch, you would execute the following command in the destination switch’s
CLI:
Figure A-5. Switch-to-Switch, from Either Flash in Source to Either Flash in
Destination
Using the HP TopTools for Hubs & Switches Utility
HP TopTools for Hubs & Switches includes a software update utility for
updating on HP ProCurve switch products such as the Series 2500 switches.
For further information, refer to the HP TopTools for Hubs & Switches User
Guide, provided electronically with the HP TopTools software.
To Next Page
Loading...
Need help?
General