3-9
Using the Command Line Interface (CLI)
Using the CLI
Using the Command Line
Interface (CLI)
Typing ? at the Manager level produces this listing:
Figure 3-4. Example of the Manager-Level Command Listing
When - - MORE - - appears, there are more commands in the listing. To list the
next screenfull of commands, press the Space bar. To list the remaining
commands one-by-one, repeatedly press [Enter].
Typing ? at the Global Configuration level or the Context Configuration level
produces similar results.
Use [Tab] To Search for or Complete a Command Word. You can use [Tab]
to help you find CLI commands or to quickly complete the current word in a
command. To do so, type one or more consecutive characters in a command
and then press [Tab] (with no spaces allowed). For example, at the Global
Configuration level, if you press [Tab] immediately after typing "t", the CLI
displays the available command options that begin with "t". For example:
HP4108(config)# t[Tab]
telnet-server
time
trunk
When - - MORE - -
appears, use the
Space bar or [Return]
to list additional
commands.
To Next Page
Loading...
