HP 5120 series User Manual

121
To do… Use the command… Remarks
Enter system view system-view —
Enable the validity check function
when upgrading the Boot ROM
bootrom-update security-check
enable
Optional
By default, the validity check
function is enabled at the time of
upgrading Boot ROM.
The Boot ROM programs of
member devices vary with devices,
so users are easily confused when
upgrading the Boot ROM. With the
validity check function enabled,
the device can strictly check the
Boot ROM upgrade files for
correctness and the version
configuration information to ensure
a successful upgrade.
Return to user view quit —
Save the Boot ROM program to the
root directory of the Flash of the
master device by using FTP, TFTP,
or other available methods.
—
Required
For more information about FTP or
TFTP, see the chapters "FTP
configura
tion " and " TFTP
configura
tion. "
In FIPS mode, you must use SFTP to
transfer the Boot ROM program.
Upgrade the Boot ROM program
on member devices
bootrom update file file-url slot
slot-number-list
Required
Available in user view.
In FIPS mode, the program must
pass authenticity verification
before this command can be
executed.
Reboot a specified member switch
or the IRF virtual device
reboot [ slot slot-number ]
The slot keyword specifies a switch
by its member ID of the IRF virtual
device. If the keyword is not
provided, the IRF virtual device will
reboot.
Available in user view.
CAUTION:
To execute the bootrom command successfully, save the Boot ROM file in the root directory of the stora
g
e
media on a member device.

HP 5120 series Specifications

General

Brand	HP
Model	5120 series
Category	Switch
Language	English