HP 5120 series User Manual

56
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see "Configuration requirements."
Configuration procedure
Follow these steps to configure password authentication for modem login:
To do… Use the command…
Remarks
Enter system view system-view —
Enter one or more AUX user
interface views
user-interface aux first-number
[ last-number ]
—
Specify the password
authentication mode
authentication-mode password
Required
By default, the authentication
mode is none for modem users
Set the local password
set authentication password
[ hash ] { cipher | simple }
password
Required
By default, no local password is
set.
Configuring common settings for
modem login
—
Optional
For more information, see
"Configuring common settings for
modem login (optional)."
When you log in to the device through modems after the configuration, you are prompted to enter a login
password. A prompt such as <HP> appears after you input the password and press Enter.
Configuring scheme authentication for modem login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see "Configuration requirements."
Configuration procedure
Follow these steps to configure scheme authentication for modem login:
To do… Use the command…
Remarks
Enter system view system-view —
Enter AUX user interface
view
user-interface aux first-number
[ last-number ]
—

HP 5120 series Specifications

General

Brand	HP
Model	5120 series
Category	Switch
Language	English