HP 5120 series User Manual

62
Displaying and maintaining CLI login
To do… Use the command… Remarks
Display the source IP
address/interface specified for
Telnet packets
display telnet client configuration
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display information about the user
interfaces that are being used
display users [ | { begin | exclude
| include } regular-expression ]
Available in any view
Displays information about all user
interfaces that the device supports
display users all [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display user interface information
display user-interface [ num1 |
{ aux | vty } num2 ] [ summary ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Release a specified user interface
free user-interface { num1 | { aux |
vty } num2 }
Available in user view
Multiple users can log in to the
system to simultaneously configure
the device. In some circumstances,
when the administrator wants to
make configurations without
interruption from the users that
have logged in through other user
interfaces, the administrator can
execute the command to release
the connections established on the
specified user interfaces.
You cannot use this command to
release the connection that you are
using.
Lock the current user interface lock
Available in user view
By default, the current user
interface is not locked.
This command is not supported in
FIPS mode.
Send messages to the specified
user interfaces
send { all | num1 | { aux | vty }
num2 }
Available in user view

HP 5120 series Specifications

General

Brand	HP
Model	5120 series
Category	Switch
Language	English