HP 5120 series User Manual

48
To do… Use the command… Remarks
Enable command authorization command authorization
Optional
• By default, command
authorization is not enabled.
• By default, command level for
a login user depends on the
user privilege level. The user
is authorized the command
with the default level not
higher than the user privilege
level. With the command
authorization configured, the
command level for a login
user is determined by both
the user privilege level and
AAA authorization. If a user
executes a command of the
corresponding command
level, the authorization server
checks whether the
command is authorized. If
yes, the command can be
executed.
Enable command accounting command accounting
Optional
• By default, command
accounting is disabled. The
accounting server does not
record the commands executed
by users.
• Command accounting allows
the HWTACACS server to
record all executed commands
that are supported by the
device, regardless of the
command execution result. This
helps control and monitor user
operations on the device. If
command accounting is
enabled and command
authorization is not enabled,
every executed command is
recorded on the HWTACACS
server. If both command
accounting and command
authorization are enabled, only
the authorized and executed
commands are recorded on the
HWTACACS server.
Exit to system view quit —

HP 5120 series Specifications

General

Brand	HP
Model	5120 series
Category	Switch
Language	English