HP 5120 series User Manual

58
To do… Use the command… Remarks
Enable command
accounting
command accounting
Optional
• By default, command accounting
is disabled. The accounting
server does not record the
commands executed by users.
• Command accounting allows the
HWTACACS server to record all
executed commands that are
supported by the device,
regardless of the command
execution result. This helps
control and monitor user
operations on the device. If
command accounting is enabled
and command authorization is
not enabled, every executed
command is recorded on the
HWTACACS server. If both
command accounting and
command authorization are
enabled, only the authorized and
executed commands are
recorded on the HWTACACS
server.
• Configure the AAA accounting
server before enabling command
accounting.
Exit to system view quit —
Configure
the
authentica
tion mode
Enter the
default ISP
domain view
domain domain-name
Optional
By default, the AAA scheme is local.
If you specify the local AAA scheme,
perform the configuration
concerning local user as well. If you
specify an existing scheme by
providing the radius-scheme-name
argument, perform the following
configuration as well:
• For RADIUS and HWTACACS
configuration, see the Security
Configuration Guide.
• Configure the username and
password on the AAA server.
(For more information, see the
Security Configuration Guide.)
Apply the
specified
AAA scheme
to the domain
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local |
none | radius-scheme
radius-scheme-name [ local ] }
Return to
system view
quit
Create a local user and
enter local user view
local-user user-name
Required
By default, no local user exists.

HP 5120 series Specifications

General

Brand	HP
Model	5120 series
Category	Switch
Language	English