EasyManuals Logo

HP 5120 series User Manual

HP 5120 series
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
66
To do… Use the command…
Remarks
Enable the HTTPS service ip https enable
Required
Disabled by default.
Enabling the HTTPS service triggers an SSL
handshake negotiation process. During the
process, if the local certificate of the device
exists, the SSL negotiation succeeds, and the
HTTPS service can be started normally. If no
local certificate exists, a certificate application
process will be triggered by the SSL
negotiation. Because the application process
takes much time, the SSL negotiation often fails
and the HTTPS service cannot be started
normally. In that case, you need to execute the
ip https enable command multiple times to
start the HTTPS service.
Associate the HTTPS service
with a certificate
attribute-based access control
policy
ip https certificate
access-control-policy
policy-name
Optional
By default, the HTTPS service is not associated
with any certificate-based attribute access
control policy.
Associating the HTTPS service with a
certificate-based attribute access control
policy enables the device to control the
access rights of clients.
You must configure the client-verify enable
command in the associated SSL server
policy. If not, no clients can log in to the
device.
The associated SSL server policy must
contain at least one permit rule.
Otherwise, no clients can log in to the
device.
For more information about certificate
attribute-based access control policies, see
the Security Configuration Guide.
Configure the port number of
the HTTPS service
ip https port port-number
Optional
443 by default.
Associate the HTTPS service
with an ACL
ip https acl acl-number
Required
By default, the HTTPS service is not associated
with any ACL.
Associating the HTTPS service with an ACL
enables the device to allow only clients
permitted by the ACL to access the device.
Set the web user connection
timeout time
web idle-timeout minutes Optional
Set the web log buffer size web logbuffer size pieces Optional
Create a local user and enter
local user view
local-user user-name
Required
By default, no local user is configured.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5120 series and is the answer not in the manual?

HP 5120 series Specifications

General IconGeneral
BrandHP
Model5120 series
CategorySwitch
LanguageEnglish

Related product manuals