193
Creating a user profile
Configuration prerequisites
Before you create a user profile, complete the following tasks:
• Configure authentication parameters on the device.
• Perform configurations on the client, the access device, and the authentication server, for example,
username, password, authentication scheme, domain, and binding a user profile with a user.
Creating a user profile
Follow these steps to create a user profile:
To do… Use the command…
Remarks
Enter system view system-view —
Create a user profile, and enter its
view
user-profile profile-name
Required
You can use the command to enter
the view of an existing user profile.
Configuring a user profile
After a user profile is created, apply a QoS policy in user profile view to implement restrictions on online
users. The QoS policy takes effect when the user profile is enabled and a user using the user profile goes
online.
Follow these steps to configure user profile:
To do… Use the command… Remarks
Enter system view
system-view —
Enter user profile view
user-profile profile-name Required
Apply the QoS policy
qos apply policy policy-name
inbound
Required
The inbound keyword applies the
QoS policy to incoming traffic of
the switch (traffic sent by online
users).
To Next Page
Loading...
