HP 5120 SI Series

252
To do... Use the command… Remarks
Establish a connection
between the SSH client
and the server, and
specify the public key
algorithm, preferred
encryption algorithm,
preferred HMAC
algorithm and preferred
key exchange algorithm
• In non-FIPS mode:
ssh2 [ipv6] server [ port-number ] [ identity-key
{ dsa | rsa } | prefer-ctos-cipher { 3des | aes128
| des } | prefer-ctos-hmac { md5 | md5-96 |
sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher { 3des |
aes128 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
• In FIPS mode:
ssh2 [ ipv6 ] server [ port-number ] [ identity-key
rsa | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex
dh-group14 | prefer-stoc-cipher { aes128 |
aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ]
*
Required
Use either command in
user view.
Displaying and maintaining SSH
To do… Use the command… Remarks
Display the source IP address or
interface currently set for the SFTP
client
display sftp client source [ | { begin
| exclude | include }
regular-expression ]
Available in any view
Display the source IP address or
interface currently set for the SSH
client
display ssh client source [ | { begin
| exclude | include }
regular-expression ]
Available in any view
Display SSH server status
information or session information
on an SSH server
display ssh server { status |
session } [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the mappings between
SSH servers and their host public
keys saved on an SSH client
display ssh server-info [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display information about a
specified or all SSH users on the
SSH server
display ssh user-information
[ username ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the public keys of the local
key pairs
display public-key local { dsa |
rsa } public [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the public keys of the SSH
peers
display public-key peer [ brief |
name publickey-name ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view
NOTE:
For more information about the display public-key local and display public-key peer commands, see the
Security Command Reference .