EasyManua.ls Logo

HP 5120 SI Series

HP 5120 SI Series
385 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
To do… Use the command… Remarks
Configure the
password
composition policy
password-control composition
type-number type-number
[ type-length type-length ]
Optional
By default, the global
setting is used.
Configure the authorization attributes for
the user group
authorization-attribute { acl
acl-number | callback-number
callback-number | idle-cut minute |
level level | user-profile profile-name |
vlan vlan-id | work-directory
directory-name } *
Optional
By default, no
authorization attribute is
configured for a user
group.
Displaying and maintaining local users and local user groups
To do… Use the command… Remarks
Display local user information
display local-user [ idle-cut { disable |
enable } | service-type { ftp |
lan-access | portal | ssh | telnet |
terminal | web } | state { active |
block } | user-name user-name | vlan
vlan-id ] [ slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the user group configuration
information
display user-group [ group-name ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Configuring RADIUS schemes
A RADIUS scheme specifies the RADIUS servers that the device can cooperate with and defines a set of
parameters that the device uses to exchange information with the RADIUS servers. There may be
authentication/authorization servers and accounting servers, or primary servers and secondary servers.
The parameters mainly include the IP addresses of the servers, the shared keys, and the RADIUS server
type.
RADIUS scheme configuration task list
Task Remarks
Creating a RADIUS scheme Required
Specifying the RADIUS authentication/authorization servers Required
Specifying the RADIUS accounting servers and relevant parameters
Optional
Setting the shared keys for RADIUS packets Optional
Setting the maximum number of RADIUS request transmission
attempts
Optional
Setting the supported RADIUS server type Optional
Setting the status of RADIUS servers Optional
Setting the username format and traffic statistics units Optional

Table of Contents

Other manuals for HP 5120 SI Series

Related product manuals